– Inner Tie Rod Removal Tool Kit, 3/8'' Universal Low Profile Tool and Inner Tie Rod Hex Wrench Repair Remover 27-42mm End Wrench for 1/2" Square Drive, 2pcs for Most Cars Repair

Worked perfectly for me, better than the expensive ones. I torqued up to 100nm without issue on my VW Golf. I would recommend using a cable tie to apply pre tension as it will save a lot of time aligning up and messing it up.

Perfect for inner tie rod

So I purchased these to change both inner tie rods on a 1997 Fiat Ducato motorhome which were completely seized on. I tried the U shaped one first with a long extension and just get slipping and eventually rounded up the square ratchet hole. I then tried the other design where as, the more pressure you apply to undo it the more it grips and again with a really long extension bar and large ratchet it broke lose with a loud pop. So basically depending on how seized they are you might get away with the U shaped one if not the other one will almost definitely brake it loose. I use the same one I used to remove the tie rod as I did to tighten the new ones. You obviously just have to reverse it round the other way. Seem well made apart from the rounding of the square hole in the U shaped one but this could have been partly my fault for not checking if the extension bar was seated perfectly in the hole.

Good quality

I had a go at removing the tie rod ends with other methods, but given access restrictions, this was the only way to do it sensibly without damaging them too much. Aftermarket replacements have a nut machined into the ends in most cases, but again I used this tool for re-fitting them as it was just easier.

Broke on first go

Brilliant Worked a treat.

One is quite big, too big for Renault Laguna, the other works but is awkward to use. But does work quite well.

Worked like a charm. Used on a 2015 Polaris Ranger 570 mid. It’s adjustable so I can use it on almost any vehicle.

Really solid quality tools and worth the price for the kit compared to most tool shops you couldn't even get 1 tool for the price.

Strong well made. For the money I was impressed by the craftsmanship as soon as I opened the box. I haven't actually used it yet, so if anything changes, I'll let you know. Nice addition to my work bench!

I was in a pinch when I ordered this, the removal kit I rented from the parts store didn’t have the right size in it. I used the tool with the moving mechanism on a long extension and it worked great. Flip the tool around and it worked great to tighten 10/10 would recommend

Works exactly as described.