C8 Wood Full-Tower E-ATX PC Case, Wooden Front Panel, No Fans | Wooden Front Panel, Seamless Tempered Glass Front & Side Panels, RTX 40 Series GPU Support, 360mm Radiator Support, Type-C

It is compatible with anything you could fit it it, with the extra space and mounts it would fit anything I could imagine. Aesthetics & Design: The Antec C8 Wood is a fantastic-looking product. The wood accents provide a premium, sophisticated aesthetic that stands out from standard PC cases. It serves as an excellent showcase piece for high-end components. Internal Space & Compatibility: This case is exceptionally large. I used it for a heavy-duty Threadripper build featuring an oversized E-ATX motherboard, and the board fit seamlessly with room to spare. The sheer volume of the case makes the building process entirely stress-free. There is ample clearance on all sides, providing lots of room to maneuver large components and route cables efficiently. Cooling & Airflow: Potential buyers should be aware that this case does not come with any pre-installed fans. However, the fan capacity is massive. The open design allows for highly customizable cooling configurations. Once populated with aftermarket fans, the case delivers exceptional airflow, easily keeping high-TDP components like a Threadripper processor cool under heavy loads. Final Thoughts: This is an excellent, high-quality chassis for enthusiasts who need substantial space and unhindered airflow. If you are supplying your own cooling and building with large-form-factor components, it is highly recommended. It is also very modular, panel's on all sides come off, and are removable.

I picked up the Antec C8 Wood because I needed more room for a dual-GPU setup to split my AI workloads. Everything came packed really well, and the glass panels look great once they’re on. The walnut front actually matches my desk, which I didn’t expect. I’m running an i7-13700K, a Noctua cooler, an RTX 5080 and 4070 Ti, plus about ten case fans total. For now I’ve only tested with one GPU since I’m waiting on a new PSU, but even with half the setup running, it already feels like the right case for the job. I attached my thermals for CPU Idle, CPU Max and GPU Maxed if interested. Its a significant improvement from my old case, as stress testing gave a ton of headroom for the extra GPU. What I Like: Airflow is honestly great. With all the ARGB fans going, the whole system looks like it’s about to jump through time—but in a classy, wood-accent kind of way. Bottom intake is clever and definitely helps, though it does make my feet a little cold. Building in this thing was easier than I expected for such a big case. I didn’t have any issues with knobs falling off or anything like that. And the front-panel connection being a single plug is a lifesaver. Cable management was almost relaxing with how open the chambers are. What I Don’t Like: There’s a small gap where the two glass panels meet. It’s not terrible, but it does make me wish I’d gone for the curved version. This case is also huge—like “measure your space twice” huge. Luckily I really like it, so thankfully I don't need to return it hah. Would I Recommend It: Yes, especially if you’re running a lot of hardware or just want a clean, roomy layout without fighting cables or airflow.

It's a great case at a good price. The design is what you expect from a dual chamber layout, but they take care of the details. All the panel feel strong and easy to remove and put back in place. Plenty of room for everything! My big CPU cooler fits wells. The cable management is easy, even you can do it without removing the air duct partition. The accessories kit included is good, you won't need anything else. The cooling is good just using 3 120mm fans on the side and one 140mm fan in the rear. The only thing they could improve is the power button on the front. It looks great Update: After 6 months, Had a few broken clips on my ANTEC C8 Wood case and emailed support late Sunday night. To my surprise, they replied within minutes and shipped the replacement part the next day. Incredible response time and top-notch customer service—Antec really impressed me!

The case is spacious and well thought out. There are plenty of diffrent ways to route cables with an adaquate amount of tie down points. It is easy to remove all the panels, as there arn't any major screws holding down the side pannels or the front panel. I was able to easily remove the front panel without too much issue, as I have had with some fish tank style cases that have 8+ screews for the front glass. I have a custom water cooling loop inside and I do not have any issues with space with 2 360mm radiators. This isn't the most popular water-cooling case, but I don't think it was a necessary difficult case to build a custom loop in. I did find that my combo of radiator and reservoir had a tight curve for soft tubing. I am not sure on the best way I could have mitigated that issue, but It is fine none the less with plenty of fiddling. It is a solid looking case with a nice wood accent that feels like real wood. I didn't have any defects in my wood.

case looks fantastic and is pretty painless to work with, though it is indeed heavy being steel framed. my only complaint so far is that the SSD bays are positioned in a way that makes utilizing them difficult. would have preferred both bays be mounted on the bottom together than having one be at top and another at bottom where they are too far apart to share a power cable. they are also near impossible to plug in when installed, and plugging them in before installing only works if you install the drives backwards because the thumbscrew interferes with the cables, meaning you need to use a screwdriver as there is no room for your thumb to turn the thumbscrew. could have fixed this by offsetting the thumbscrew another centimeter or two, or better yet, putting the thumbscrew beside the bay instead of in front of it where the drives slide in and out. excellent concept, but questionable delivery on design. everything else with the case is designed quite well and i love the two separate panels for the glass mating with a perfect 45 degree blend. i was not a fan of having to man-handle a single heavy curved glass pane that apparently arrives broken half the time for the c8 curved version. just seemed like it would be a bit much to deal with, so opted for this version instead, glad i did.

Upgraded from a mid tower to this one! Really liked the wood panel on the front and it was super easy to build into. Will say that the cable management is decent but still kinda interesting with where the hdd and ssd cages are. Everything fit and Really like having extra space due to my cpu water cooler and the large gpu I have. Would definitely recommend.

I really enjoyed building in this case and yes its huge but if you have room for it then I highly recommend it. Its also easy to maintain and clean the filters. I have had it for a year and it still looks as good as new. The tool less design for removing the glass panels is great and the build quality is very high. Also the wood version looks cool and goes well with my desk aesthetics.

Truly, an outstanding case for the money. I just cracked mine open and started to poke around in it, pre-build. Lots of very savvy touches in this thing, probably more than I can think to mention. But it you are in the market for a full tower I can hardly see how you could do much better for less than $150. I've owned full tower cases over the years from the likes of Antek, Lian and Fractal Design. Even have an old factory water cooled Koolance unit from back in the day. But bang for buck I'd say this one tops them all. Of course user needs have changed over the past 20 years, and this unit reflects the current trend of less old style spinning HD's and more of an emphasis on space and efficient cooling for the very largest GPU's. I think most of us are going to external arrays by now, so the lack of drive slots shouldn't be much of a negative. Put a couple 24-30 tb spinners in there and you should be good to go unless you're into mass media storage. So many little thoughtful touches here. Premounted motherboard standoffs, space for just about any AIO or funky fan configuration your little modding heart may desire, and of course the latest in inputs on the top panel. Nice bottom air intake with an included filter. Thoughtful cable routing and if you're into having a Christmas pageant in your case, this box will show it off elegantly. About the only negative I've noticed so are is it's a little tricky to get the side and top panels off. Not a very intuitive process, but just pay attention to the manual and go slow. Very happy overall and a big thumbs up!

This is a VERY high quality case. Much better quality than you'll find from the similar Corsair 6500D that costs almost double. GamersNexus did a good review of it with positive response. The wood looks great with no flaws. The panels all fit together nicely, the glass fits nicely, it can take a lot of fans AND 3x 360mm rads, the back side allows for lots of cable management...I have zero complaints with this case. I previously ran a full custom water loop with 2x 360mm Corsair XR5 radiators and they fit great with TONS of room, and room for another 360mm rad. Currently running 12 fans in it with push/pull on an AIO rad. It's a seriously good case.

(C8 Wood full Tower case con rifinitura in legno) Contenitore pc Capiente. Spazio per dissipatori a Liquido sia in orizzontale che in verticale, sia nella parte superiore che in quella inferiore ,oppure sul fianco DS in verticale. lo Spazio per il dissipatore da 360 cm non è un problema per tutte le 3 posizioni. Installazione della scheda madre senza problemi cosi come tutti i componenti. Esteticamente perfetto e bello da vedersi il che non guasta. Per l'aereazione del case ci si può sbizzarrire con ventole da 120/140/160 mm e posizionarle dove rimane spazio dopo aver installato il dissipatore a liquido . Veramente un ottimo contenitore. Una critica la devo fare ed è : In sostituzione del box per due HD meccanici ormai obsoleti sarebbero più graditi box per HD SSD. Comunque un Ottimo Acquisto

Very beautiful and sturdy, moreover it feels like a high quality case, lots of space inside and good sorting sytem on back compartment. It's price is low because no fans are included but it's totally worth it

Belle box

Such a nice case to build in. Looks great and loads of room even for bigger radiators and GPUs. Airflow is really good with plenty of fan options. Looks great too with the panoramic glass surround. IO on the front is well placed and easy to access. Very happy with my purchase!