PC Products PC-Lumber Moldable Epoxy Putty

This is great for termite damage. The putty is sometimes soft and other time stiffer so I dunk the putty in water several times while mixing and then you can make it as soft as you want. Make sure there is not a lot of extra putty out side of where you are putting it and you can use water to make the putty smooth out. If you have large termite areas you will need a lot of putty or you can start the fill hole with another filler and then finish with the putty. It dries hard and is easy to sand and the termites will not comeback to eat it. I have use wood Bondo and wood filler but I like the putty the best because you can mold it into any shape and push it into the termite damage to fill the termite holes. Also if you are working on eaves it won’t fall out of the hole as the other ones did.

I own a furniture refinishing business and I needed a lot of @%ickwood to repair a ton of missing chunks of wood on chair legs and table legs for a dining set. I ordered some of the expensive stuff and was curious about PC Products version. I read on their website and they look to have been in this wood "putty" business for a long time and they are here in the states. The price was a lot less than the other brand. I bought two of them and wow, it's the same stuff or close enough. Does exactly what I need it to and sands as well, stains the same and accepts lacquer perfectly. And when I say sands well, you who have used this type of putty know that it clogs every type of sanding product out there so that's a given, but it will sand. The point is, it's the same type of product for a lot less. I was even able to make a mold of some repeating shapes with it and made my own replacements using PC putty. Give it a try. It's a 20 minute dry time and I haven't seen a 5 minute one. That's ok, I always do my putty a few hours or more before staining anyway.

Very pleased. Used this to repair a rotted piece of fascia board. Easy to work with and sand. The fascia board is textured was easy to create texture with a chisel and painter's tool. Clean out all the rot; if needed, add a form; fill with putty; and paint. Took about 1 1/2 two oz tubes to fill the hole. From ground level can't tell it's been patched.

Easy to use. Smells really bad but if you work outside it wouldn’t be too bad. Very sturdy once dried and you don’t need too much to cover big surfaces. I dropped a project with that as coating down the stairs and it had no marks. Don’t try and mix it with bare hands, it may give you a reaction. I tried that once because I don’t like the way gloves feel, my hands were peeling for weeks.

Great great product takes a little longer to set than quikwood but love it

Easy to knead and shape. Great for filling screw holes or strong repairs. Not very sticky, a lot like silly putty when mixed, but using a lot of force when applying will help it stick.

I used this to fix an outdoor wood arm chair. It worked great I molded it smoothed it out and let it dry , then painted the area . It reminded me of playdoe in a way just a tougher version :) Just be mindful of how much you may need depending on your project . Once it dries it is very tough , sturdy. Easy to use though .

I bought this a while ago. At first it worked ok. But I used it a couple times recently to patch small holes on a couple drawers. It didn’t get harden even after 24 hours in a dry and warm temperature. I had to pick it all out and use something else. Very disappointed! This tube is not very cheap.

Muy bueno, rinde muchísimo. Hay que tener práctica para usarlo. Lo utilicé para tapar los hoyitos de cajones y queda super bien, ni siquiera se nota que había un hoyo