3D Printer Filament Rack for 45 Spools 5 Tier Filament Rack

Love this rack. Keeps filament very organized. Shelves are very stable. Super easy to put together. Light enough to pick up and move. Wish it had wheels that would be the only thing that would make it even better. Shelves are very stable. Love it so much picked up 3 of them. Highly recommend. Great value. Makes life easier to find filaments.

You wont go wrong with this stand. It is all metal and very sturdy. I really liked it cause the floor it is sitting on slants down a little but this stand has adjustable feet so I was able to raise up one side and level it out. Holds a lot of rolls and as in the picture you can even place boxes on it if desired. I was a little worried at first due to the price, but it is made extremely well, easy to put together and well worth every penny.

The filament rack is gust the right size for all my filaments. It is strong for the weight put on it

Easy to out together, solid and holds a lot of filament rolls and boxes. Great space saver and organizer.

The quality of this spool holder rack exceeded my expectations! Before I got this, I had spools sitting all over the place, now I have them all in one central location, easy to find and easy to choose. Setup was a breeze, but takes some time because there are quite a few screws, it took me about 1/2 hour to assemble. The feet have adjustable pads to compensate for an uneven floor so the rack sits nice and stable. I bought the large size because I needed extra room for future expansion. This is a very good value!

I recently started getting hot and heavy into larger and more frequent prints and my previous storage solution (the floor) just wasn't cutting it anymore. I tried a few options but settled on this one. It does have the small flaw that real small reels don't work, but everything else - in plastic or not- sits on their perfectly and is easy to view. The size has let me organize by types like TPU and silk and GITD, while also having a super accessible 'bulk' area - and most importantly room to grow. Most off the options I came across felt limited space wise and were just a fancy or expensive way to keep filament off the ground, but nothing that would be useful without buying a bunch of them - if you have excess or large orders of filament. I have it currently at around 50% capacity and its rock stable with no sway. If I could improve anything - I'd just add an option to make it taller at the same width - I'm tall and could really use the vertical space, but I was EXTREMELY pleased with this purchase and don't regret any part of it.

The threads in the parts were not all good. If I did not have a tap and die set, the unit could not have been assembled. In one of the support rods, the threaded socket was placed at an angle and the screw would not fit into it. I had to insert a punch in the hole and bend it so the screw would fit in. The screw holes were sometimes dirty and I had to clean about 1/4 of them with a tap. The picture shows the misaligned threaded hole. That said, the completed rack is sturdy now that it is finished.

Edit: Originally I had a 1 star review because the box was missing 6 bolts. So I had to wait to finish putting it together and had to spend another $10 to order the M6-1.0 x 30mm bolts for it. :( I now put it together and really like this rack a lot. It has a small footprint but seems very solid. I like the construction and it was extremely easy to put together. The best thing is for its small size it does hold a lot of filament and I have un-bagged rolls, bagged rolls and boxes on it. Trust me, just get the 7 tier version, you will thank me. I removed a star due to the inconvenience. I put the required bolt size above in case anyone else has this issue and knows what to order.

Love it !

If you want quality, run for the hills as you won't get that with this product. Cheap of the cheap with certain bits just not fitting at all.

Die praktischen Eigenschaften sind ok, das Regal ist einigermaßen stabil, schwankt allerdings seitlich hin und her. Das könnte etwas stabiler sein. Rollen wären praktisch, es gibt aber nur Füße, von den zwei davon leider schief sind, da das Gewinde im Rohrprofil schief eingepasst wurde. Die qualitativen Mängel gehen leider weiter, sowohl einige der Rohre als auch ein paar Haken sind im Anlieferzustand schon massiv verrostet. Kein Wunder, denn eine Grundierung gibt es nicht, der Lack wurde direkt auf das Metall gesprüht und das auch stellenweise recht mangelhaft. Bei mehreren Bohrungen ließen sich auch die Schrauben nicht durchstecken, weil sich massive Grate dem entgegen stellten. Das ist wirklich Murks, ich musste deswegen erst mal zeitraubend mit einer Feile nacharbeiten Bei dem aufgerufen Preis würde ich mir schon eine halbwegs anständige Verarbeitung wünschen. Bei beiden bestellten Regalen war die aber annähernd gleich schlecht.

While not the most sturdy it definitely does the job at a decent price.

Excelente produto. Não sou de avaliar minhas compras, mas para quem realmente está com tudo na impressão 3d e tem trocentos filamentos. Eu aconselho muito comprar esse rack. Muito melhor do que ficar imprimindo racks e gastando o próprio filamento para tal. Ele é muito resistente, com barras laterais de ferro e as de segurar o filamento. Realmente pode encher o rack de filamentos de 1kg em todos os nichos que ele aguentou de boa.