Thermal Grizzly - PhaseSheet PTM (50x40mm)- High Performance Thermal pad with Phase Change Material | Durable, not electrically Conductive | for CPU, GPU & Electronics Cooling

Good quality PTM, the temps dropped after changing, be carefull as the size of the sheet is very small so dont waste the PTM

I used it on my Asus M16 gaming laptop which had metal thermal paste and its fans kept speeding up and laptop heating up even on light work. After repasting with PTM sheet, found noticeable difference and during normal use fans hardly ran to high speed. Thermals were much better as well. Also, used it on my brother GPU and temps dropped by 15 degree C and GPU did not hit thermal limits anymore.

my mini pc m6 ultra went from 90-80 temp to max 60c to 65c at max watt shocked me go for it if u need to lower your temp

Perfect product. Legit. CPU temps are very good. Just follow instructions. Just chill in fridge, do not freeze.

Incredibly difficult application, following all instructions including putting in freezer did not help, thermal pad was stuck to the plastic and was ruined by the time I got it out, stick with paste, this is not worth the hassle, I can get a regular paste application done in under a minute, but this took me an hour and still failed horribly.

Thanks its all good

I'm shocked to say that it just didn't work for my laptop cpu.. I don't know why but it's extremely shocking. I sliced it to 6 layers and placed 3 layers on cpu and 3 on gpu for best conductivity to leave no airgap But that also didn't help...

Came in nice, neat packaging. Works very well.

I own a Lambda Tensorbook 2 (basically a Razer 15) for a few years now. Some days ago, I opened it up, and re applied thermal paste (MX-40) carefully on GPU and CPU. The improvement was significant, but it showed two hotter spots which were still causing some throttling. So I decided to try this product. I left it in the fridge about 10 minutes, cleaned the old paste, cut the sheet into two pieces for GPU and CPU, and applied the sheets over them. BOOM. 5 seconds. The peel is a bit hard to remove, technical tweezers helped. I cut it slightly bigger than the chips, and still got some left for a change in the future. TEMPS ARE INSANE! The PC sits now at 4300 MHz across all cores in PL2 (boost mode) with avg temp around 80 (more or less 20 seconds boost, 90 W), and at 3700 all cores in PL2 at about 60 degrees. ZERO THERMAL THROTTLING. The GPU couldn’t get hotter than 61 degrees in 5 minutes of test load. My fans are now basically never on. I am very happy with the purchase.

This stuff is actually great! I can’t speak for larger desktop cpu’s but I used it on my gaming laptop after my thermal paste dried up and was curious about PTM, this stuff works wonders there wasn’t much of a difference with my GPU temps since those were always fine but this lowered my laptops cpu temps from 20 degrees cooler which is more than ideal with how notoriously bad laptop heating is. If you have a gaming laptop or a laptop that heats fast this is a easy recommend and you’ll be more than happy with its results and how effective it is at handling temps

Hp omen 16: I dropped from 98c cpu to 83 in stress test And in gaming from 94c to high 70s

Another amazing Thermal Grizzly product. Easy to use, much easier and simpler than Thermal paste. Used it on my RTX3090 massive improvement of thermals. I highly recommend this product