Microswiss FlowTech Hotend Upgrade for Sovol SV08 - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA

Amazing change to sovol sv08. I wasn't sure about the change after constant blockages and useless nozzles from blockages. I tried another hotend upgrade but never managed much better. Since I've changed over to Flowtech hotend I can print again!! Finishing my first large print( 27hrs) ,no issues yet. No blockages and smooth flow, hotend copes well with the speed too.

This was fitted in under 5 minutes and so far has worked very well. I'm hoping in future the cold nozzle change will prove itself and make life easier, new nozzles already ordered. I'm very happy with it's performance but have only printed a couple of models.

This is a must upgrade for the SV08 if you plan to use PETG or anything besides PLA the stock nozzle on the SV08 will get pushed out at higher temps its a pressed fit nozzle un like Micro Swiss its a screw in nozzle I highly recommend it I am able to print faster and better with it For best results re calibrate Z offset and flow

Gran extrusor

Das Hotend paßt perfekt in meinen SV08. Auch die ersten Tests verliefen positiv. Klare Kaufempfehlung.

This nozzle produces better quality prints then the stock and has a variety of replacement nozzles. The quality if the wiring and materials is extremely high. This is a must have upgrade for this machine. From one business owner to another, Thank You for making a high quality product.

This IS the SV08 fix. I tried multitude solution for the hot end,even the bambu lab modification hot end and i was not able to obtain a print either. So far no flaws at all and im about 200 hours of printing in PA6-CF with this hot end,one print was 55 hours alone and went A1 from beginning to the end. THIS IS THE FIX FOR SV08 ABOUT THE HOT END SUCKING BAD.