Controller 1 PRESET Thermal Trigger | Designed for Computer, AV Cabinet, Home Theater Cooling.

Working with two fans now installed in my AV cabinet. Turns fans on when cabinet heats up and controls both fans keeping my receiver cooler and saving my components should have purchased much sooner.

This is a great thermal temperature control trigger unit it's very efficient and accurate as per the temperature settings You set. It's also very small tiny it's approximately "1" W X 2 1/2 inches long much smaller than the specs provided here on the product page information. This little unit does a great job controlling my AC infinity fan that I'm using to keep a Wall plug power distributor that I have plugged into a surge protector cool from overheating. I use the digital version for my other AC infinity fans that are keeping my Denon AVR unit cool. Both of these thermal temperature control units do a fantastic job controlling the fans by the selected temperature settings it's a great investment to keep your expensive electronics cool. If you're debating about purchasing this product or any product from AC Infinity please be assured that they have very fine reliable products that are worth the money you pay for them, they're all of great build quality that's made to last. I highly recommend this thermal temperature control unit 100%.

Works exactly as described. I have a couple of class D amps stacked with very little space available between them. Put the sensor between them, hooked it up to the fan as indicated and the amps have stayed cool despite extensive use.

I use this on my car audio amplifier to control my fans. Therefore my fans only run when needed. Works great simple install and quality item. I would definitely buy again

Some background - I've been using AC Infinity products for 5 years (as of April 2024). They're great because the build great products that excel for the market they're intended to be used for. While the price is higher than their competitors, it is worth it. I purchased this temperature sensor for a niche purpose. I have a La-Z-Boy double recliner with a built-in armrest storage unit w/ AC outlets inside. It also has dual trays which are perfect for laptops. But I feared putting a 250 watt gaming laptop power supply in the storage unit due to the heat that it makes. To combat the heat, I purchased The AC Infinity Controller 1, and connected it to a set of dual 40mm fans. I also modified the back of the storage unit to accommodate the fans and am exhausting the air out of the back of the storage unit, instead of blowing air into it. This design is cool and efficient, and the Controller handles turning the fans on and off as desired. I also appreciate they programmed hysteresis into the controller so it doesn't constantly turn on and off at the target temperature. I don't have the # in front of me but I want to say it's 2-3 degrees F below the selected temperature. I'm incredibly happy with its design. It has worked as desired for about 2 months now, and I anticipate it will continue to do so for the foreseeable future.

I have purchased this multiple times because it is very simple to use. One button push configuration to determine one of 3 temperature settings with the 4th setting being on. I have not gone as far as checking the air temperature near the thermometer but it seems to work based simply on ambient temperature in the room where I have the device set-up. Of the three I have in use, they are still working and the oldest one is more than three years old in a home build electronics cabinet managing 4 fans. The second one is in a custom battery / solar generator managing a single fan and the third is mounted in a large solar generator managing 2 fans. I have had zero electronics failures.

My AV receiver is located on the top shelf of a wooden built-in media cabinet. I have no doors on the cabinet, and any heat emanating from my AV equipment must vent through the front. My receiver sits on the top shelf and has about 4 inches of clearance above the cooling vents. However, heat used to get trapped between the top of the receiver and the top of the cabinet. Not anymore though! I placed a AC Infinity MULTIFAN S2 on top of the receiver vent and it blows all heat out the front of the cabinet. What I like about this fan is (i) it is well made, (ii) it has insulated rubber feet to isolate itself acoustically from the receiver, (iii) it has three fan speeds, (iv) its a blower configuration that blows the air forward vs. upwards, and best of all (v) it is very quiet. In the "Low" setting - which is sufficient for my needs - the fan's noise level is barely a whisper and cannot be heard across the room when all music is off. The fan is powered by USB or optional AC adapter. To mine I added a compatible thermal switch (the AC INFINITY CONTROLLER 1, Thermal Trigger) that activates the fan only when heat build-up exceeds a set point set by me. Once the receiver cools down after turning it off, the thermal switch turns the fan off via a small sensor placed on top of the cooling vents. The fan and thermal switch are connected by USB, and installation is straightforward and very easy. I highly recommend the fan, AC adapter, and thermal switch - the link for the fan follows: https://www.amazon.com/gp/product/B012CL2V3I/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Thermal trigger worked perfectly for my application, controlling two 1W USB fans to cool a mini PC inside a wooden cabinet that was getting hot. Initially I thought the trigger was faulty because after cycling once it would power off and remain off. BUT I put a meter on it and found that my cheap USB power supply voltage was dropping to ~2v when the load cycled on, so the trigger would power down. I upgraded my power supply and the thermal trigger now works exactly as described. AC Infinity's tech support was responsive and helpful.

Comme tous les produits AC Infinity ce contrôleur est très efficace et facile à connecter avec Multifan S2 de la même marque . Il permet un contrôle des températures du ventilateur auquel il est raccordé pour refroidir un Switch PoE qui aurait tendance à chauffer. Qualité de fabrication et efficacité excellente. À recommander.

Angefangen mit der sehr guten Verpackung über die Produkt- und Funktionalität kann ich ausschließlich positives abgewinnen. Ich nutze dies in Verbindung mit einem AC Infinity MULTIFAN S4 140mm USB Lüfter zur Vermeidung eines Wärmestau's unter meinem aktiv belüfteten Induktionsfeld. Der Sensor ist bei mir auf 92f eingestellt und reagiert perfekt darauf. Da ich kein Elektriker bin, kam für mich das direkte anschließen an den Stromkreislauf im Kochfeld nicht in Frage. Somit suchte ich eine Lösung, bei der meine Frau beim kochen nicht ständig daran denken muss einen Lüfter ein/aus schalten zu müssen.

Ottimo accessorio per il comando automatico delle ventole della stessa azienda. Utilizzate per raffreddare un sintoamplificatore all'interno di un mobile. Molto performante

説明書がなく設置の仕方や温度設定が分からず感覚でセッティングしてみたが、キチンとオン・オフできているので良かったともいます。

Easy to set up. Works as expected.