Lyman Powder PAL™ Universal Funnel Pan, black

Had one and lost it in a move had to order it because could not find one local. It works great

Handy piece, and priced right.

Price - half the cost that RCBS wants for their piece of tin. OK - $9 is still a lot for a little piece of plastic... but the used scale I bought was missing the pan and I needed a replacement (using this with an RCBS 10-10 balance beam scale). Function: - The funnel function is great. Works so much better that than the pour spout on an open pan. Have used with both Winchester 231 powder which is flakes and with the fine grain Accurate #2. No spillage with either one when dumping the powder from the pan to the casing. - Static - being plastic it has a lot of static out of the box. Learned from someone elses suggestion to thoroughly wipe it on all sides with a dryer sheet. Then dump some powder through it to let the powder dust coat the pan. Works fine after that.

I should probably give this three stars, but I feel like it's a good product except for that one issue. I was using a hornady powder dropper, which is meant to interface directly with a case neck. Powder would hit the pan with too much energy though, so I ended up using a 7mm Rem case to drop the powder into, then pour that into the pan on the scale. It seems like the plastic they're using isn't a good choice. It's too hard and bouncy. It also has some issues with static (powder clinging to pan), but that problem didn't seem to be a consistent one.

I have a old model of this pan but I thought I would replace it with the new larger handle model. Right off the flake powder stuck to the pan. I wrote to customer service. I got an answer within a few hours telling me it was static electricity. It suggested that I wet it down with Windex which I did on three occasions making sure that the pan was completely dry but it did not work. Powder still stuck to the pan. I wrote back and received an answer within a few hours and it suggested using graphite. I have not done that as yet. I have been buying Lyman products for years and have never had a problem. This is the first item which is truly a disappointment. Don’t waste your money on this item. I just washed this pan in Dawn. Powder does NOT stick to the pan now! It is too bad the Customer Service at Lyman does not know this. Now I can recommend this item.

Very handy works well.

Works great, pours almost any size cartridge from 45 to 308 to 10mm, 9, 223, no problem. People talk about static, wipe it down lightly with a dryer sheet and zero issue with static. Works awesome, wide finger tabs for easy use. Would definitely recommend for reloading

Works very well and doesn't leave a mess. Used it with my trickler for precise tuning, and it is handy with my powder throw when tuning a charge in. I leave it on a digital scale and throw each 10th load to this pan keeping an eye out for deveation on bulk runs. It was a little static clingie when new with powders, so a read hack taught me to use a dryer sheet to wipe it out and the static cling disappeared.

Tolles Produkt. Funktioniert einwandfrei.

Très pratique, concernant le problème électrostatique faite un peu de buée en soufflant dessus et essuyer avec un microfibre. Pour moi c'est nickel.

Non è antistatico, la polvere si attacca, va bene solo oer il piombo

very good does save time

Great product!