Liquid Electical Tape

Lasts a long time after fully drying. Been using this brand for a while and all the stuff I've used it on are still going strong. Super easy to use, thickness is low but you are able to apply more than 1 layer to increase thickness really easily. This stuff does smell (not a bad smell but ut is strong) so I'd recommend using outside or in a well ventilated area. Great price for it!! It is hard to remove once fully cured but that is a good upside to it

This works great for sealing my landscape lighting connections.

This stuff works pretty good, but it is tear off-able after it dries. It is mostly useful to aid in waterproofing when using other insulation like shrink tubing or when you cannot use shrink tubing. You can use if over improvised shrink tubing that is actually wrap from those rip off plastic labels like kefir has, or with electrical tape to seal things up more waterproof and prevent edges from lifting. It does dry up, well before you finish using it, but I had a quart of Crown Pro Thinner (this stuff will melt plastics) around for Barge cement and I poured some into the can and the next time I used it, the stuff was back to perfect consistancy. It will last if you seal the lid with teflon tape and put it in a plastic bag and have appropriate thinner.

The price was the deal maker. This product works great

I bought this because I had several cords, ranging from ipad charging cables to the cord for my electric razor to the cord on the vacuum cleaner, whose insulation had become brittle and was cracked and/or missing. While not visually restoring the insulation to a “like new” condition, it does do a great job repairing the insulation and, in my opinion, looks and works better than electrical tape, especially if additional build up would interfere with using something like a cord clip/hook on an appliance. While it dries or sets fairly quickly (you can safely apply additional coats, if needed, after ~5-10 minutes, the product is somewhat “gloppy” and it will run or drip before it dries sufficiently that it won’t. When completely dry, it does seem to be fairly flexible. Based on my experience, I would suggest the following: - Suspend the cord/cable horizontally and then watch for and remove any drips until it sets. If the repair is being made near the plug/connector, hanging the cord vertically could cause the product to pool excessively at the plug. - Put plastic or paper below the cord to protect the floor or work surface from any drips from the brush or the cord. - If using the brush attached to the lid, clean the product off the stem first so that you don’t have more product than you want running down the stem and onto the brush. - Be sure to clean any material off the threads of the can and the can lid before closing the can. - Instead of using the brush attached to the lid, consider using a separate brush, like a small acid brush, and wiping any excess on that brush off on an old soup can instead of the threaded edge of the product’s can. Overall, this product worked great for my applications and exceeded my expectations.

Even works on vinyl.

I recently used the STAR BRITE Liquid Electrical Tape for a few of my electrical projects, and I’m really impressed with how well it performs. The 4 fl oz bottle comes with an applicator brush cap, which makes it easy to apply the tape precisely where you need it. The liquid consistency is smooth and goes on easily, creating a solid, durable seal once it dries. One of the best features is how quickly it dries—within minutes, the tape is set and ready to protect electrical connections from moisture, corrosion, and wear. The clear finish is perfect for applications where you don’t want any noticeable discoloration, and it gives a clean, professional look to your work. I’ve used it on various electrical connections, including wiring for outdoor equipment and boat accessories, and it holds up great in both wet and dry conditions. It’s a strong, reliable option for protecting wires and ensuring long-lasting performance. Overall, the STAR BRITE Liquid Electrical Tape is a must-have for anyone working with electrical projects, especially if you need fast-drying protection. It’s easy to apply, dries quickly, and offers excellent durability for all types of electrical connections.

Bought this thinking I could save a starting-to-fray trailer connection chord, and it did. For whatever reason my dump trailer connector worked away from the 7 gang wire chord right at the connector. No way to rework it as it was welded at the factory. After cleaning everything with Acetone, I filled in the gaps with this product, giving it a couple healthy coats and I’ll tell you what…it saved the chord and connector. It is tough, looks like new and is flexible enough to handle the shaking and movement when hauling stuff. You know tape works but unravels over time…this won’t. I’m sure this will come in handy for chaffed wire, splices or other hard to reach electrical repair work in the future. Good product.

Got what I ordered and it works great. Used it on a Quadcopter I built and works well.

This is ideal for waterproofing electrical connections on boats and elsewhere, its very important to read the user instructions on this product before use. Brilliant and ideal for the purpose for which it was designed. I recommend this product.

منتج رائع مغلف بشكل جيد

This suff is brilliant for waterproofing electrical cable connections. It has a brush built into the lid, which makes it easy to spread on.

This is a very quick and clean alternative to the traditional option of grease tape. Excellent for consumer grade tasks such as sealing plus and connections on antenna and LNBs.