Seat Lift Kit | Seat Spacers | 5 inch risers

This is a must since without it you will sit so low to the ground. Easy to setup and to take apart. Very well made.

Starting off, these risers are great. That small lift improves the ergonomics of the entire rig. The height in addition to the 5 degree tilt give a much more natural feel to the shifter and pedals. This also improves the clearance under the wheel for your knees as they are at a much better angle. They arrived very promptly in a very padded parcel. The kit includes the manual, risers + bolts, and surprisingly high quality 13mm crescent wrench. Installation took me about 15 minutes and was fairly straight forward. All the parts feel sturdy and high quality -- you can really torque the bolts down without any worries of stripping or breaking. For such a low price, I highly recommend this upgrade. Side note: 4/5 stars on "thickness", kind of a weird metric to rate a product. This product is sufficiently thicc.

Before I actually get into the review I need to speak to the customer service of HomeRacer. My personal rep, Dimitar at HomeRacer has been fantastic from start to finish. I contacted him with what I wanted to do with their OpenWheeler rig, what I was looking for and he guided me to exactly what I needed. HomeRacer's OpenWheeler rig is rock solid and very well built but their customer service is even better. If you not sure what you need reach out to them and they will help you out. Without further delay let me get into the product. I already had a racing rig that I had purchased a few weeks previously and it fit the need for racing but I also needed a flight rig and OpenWheeler was the answer. First let me say the construction is of the quality that you would get if you spent about 5 times as much. Welds are perfect, everything is rigid and they send you not only ALL the tools you need to put it together they send hardware for every set up. The included instructions are very accurate, easy to understand and have tons of pictures to help guide you through the setup process. The items were packaged like it was going to battle and everything in the box was labeled making assembly that much easier. Shipping was lightning fast from order (after shipping hours) package went out next day and was on my doorstep the following day. In order to get exactly what I wanted I had to custom build (order) the parts I needed so this review will be under each item I ordered. If you reading this review I have ordered that part and highly recommend it. I can not stress this enough, if you need a racing, flight rig or a combination of both call or message them. You can thank me later!!!!

I bought this for a completely different racing rig. My fake racing seat office chair snapped off the stand a while back. So I bought a chair less and broken racing sim setup off Facebook market place. This riser kit was surprisingly easy to install onto my chair and the non-correct racing rig. With just $15 extra from a hardware store, this bolted right up. The parts are accurately cut and evenly tilted for optimal seating pattern. The height is perfect. Not to high. Not to low. 10/10 would trust this brand.

So I bought two sets so that I could raise it high enough to use as my pc gaming chair as well. I bought 4 M8-1.25 x 60mm bolts and cut the head of the bolt off so that I could use it as a stud. I connected the long and short pieces together with the flat ends against each other while making sure the angled sides are facing opposite of each other (since they're both 5 degrees. 5-5=0) it angles the legs a bit but is still sturdy and secured. After that it's just normal install! Sits a little over 18 inches and is comfortable for my 29.5 inch tall desk.

I was worried at first that the seat lift kit would raise the seat too high, but it's perfect. Instead of sitting directly on the floor with the pedals in front of you, it allows you to seat in a more natural position which helps with the realism. Seating height is similar to my Subaru BRZ — nice and low, but just high enough to be comfortable. Excellent product, hardware, finishes and worth the couple of extra bucks to complete your rig!

I ordered this shortly after building the Openwheeler Gen2. The ride height was too low for my desk but I made it work. After waiting a few days it came in, and when inspecting the risers I noticed something odd. All four risers were the same height. I initially thought nothing of it but when I tried to install them it was tough! I had to use a lot of force and eventually gave up. I left a mediocre review and thought that I just wasted $30 but to my surprise an email came in right after leaving the review. The email was from support who read my review and explained what went wrong in shipping. They then decided to refund my order completely and send new copy free of charge. Today I installed the short risers and low and behold, it works like a charm! I couldn't be happier! 10/10 Customer support and 10/10 on riser build quality.

When I got my Openwheeler Gaming Chair I also ordered these lifts. What an absolute difference in the way the chair feels being lifted off the ground. When you order these with the chair, the bottom chair frame is not attached. If the frame is attached, you will have to dismantle it to put the lifts on. The most important thing to remember is installing the lifts and pointing them in the correct direction. If you don't, the frame will not go back on correctly. These lifts are essential if you want more comfort in the chair while gaming. I highly recommend purchasing them if you plan to spend an extended period of time in the chair.