Gooseneck Tablet Holder, Tablet Stand : Flexible Arm Clip Tablet Mount Gifts, Compatible with iPad mini Pro Air, Kindle, Switch, Galaxy Tabs, More 4.7-10.5" Devices - Gray

I absolutely love this thing and use it all the time! It makes night-time browsing, watching, or reading SO much easier! I wouldn't recommend it for something that requires a lot of interaction, unless you'll be pairing it with some bluetooth device, as reaching up from bed will quickly tire your arms. The contraption does have some shortcomings, but for the most part they're fundamental issues of engineering something like this. I think the one thing that isn't, is the fact that they use a plastic screw-handle at the base, that according to many reviews is far too easily breakable, and I believe that (though I have not yet broken mine). If you take care not to over-tighten this part, I believe it can live on for a reasonable amount of time, but this is certainly the weakest aspect of the device. I imagine it was done to help keep the price at a reasonable level, especially considering how much metal must already be in it. But personally I'd pay the few bucks more for a sturdier, metal clasp at the base. Another common gripe about this device is that it will constantly slip downward from what you set it to. It's certainly easy to configure it in a way that this happens; that's not a fault of the device, but of the general problem of what you're trying to get it do (I imagine a $200+ device might solve it, but nothing this straight-forward of a solution). If you think of it like an engineer (or simply heed the advice of the accompanying paper), you'll twist it into a bit of an S shape to improve the stability of the form, or a spiral if you've the space. Yes, it'll still slip slightly at first, and yes that uses up some of the available reach, but it's a simple problem of gravity vs torque, and there's no way around the necessity. Yet another common review complaint is that the neck itself may break. Presumably yes, if you continually twist in a single direction, or constantly twist and untwist it, it will break down fairly quickly - after all, it's just a bundle of twisty metal threads, yes? For my part, I try to ensure as long a lifespan as possible by minimizing how often I reform the neck, leaving it in the shape it's in when I remove it so that I don't have to twist it back again the next time; and by first untwisting/bending it back to fully straight before reforming to a new shape. I imagine this is harder to avoid if you take it traveling a lot, however. With all these potential shortcomings, why is this still a five-star review? Because it just does such a great job of what it's made for! It's incredibly satisfying to use, and does exactly what I needed it for! And yes, perhaps it may break after half a year or something. Perhaps even only a quarter-year if I'm as unlucky as some of the other reviewers (though I do anticipate that the techniques above will save me from it being that soon, at least!). But so what? At this price?! I'd gladly consider a $5-10/mo "rental fee" for such a convenient (and now quite indispensable) device, so anything I get beyond a few months is bonus as far as I'm concerned. So if it breaks I'll just buy another one (in fact I may buy a spare in advance just in case). So now you know: yes, the bad reviews are for the most part correct. AND all the good reviews too. It's the best tool for the job (AFAIC), but it might possibly break. So what? It's cheap. And still totally worth it. That's my 2 cents!

I searched the reviews of many table holders before deciding on the Lamicall tablet stand. I was looking for one to attach to the headboard and hold my iPad Air for reading and watching movies in bed. This is a simple and inexpensive solution that seems well made and works well for my purposes. It might not work with iPads or cell phones in thicker protective cases without first removing them from the case. It works however, with the thinner case I use to protect my iPad. Review update: I have reduced my rating because it appears that the tablet holder is going to break at the joint between the two sections of the gooseneck. The connector that attaches the thinner portion of the gooseneck to the thicker section is plastic. It has cracked and is getting more loose with each use. It looks like the two sections will soon separate. This is a good product that works well except for the plastic connector between the thick and thin sections of the gooseneck. An upgrade in that one part to something more durable would change my rating back to 5 stars. Second follow up review: The plastic fitting that connects the two section of the flexible arm failed after about 11 months of use. The failure would have happened much sooner if I had not used a clamp to hold the part together after the plastic fitting began cracking. As i said before, the product fit my needs and is reasonably priced. But I would be willing to pay more for an upgrade to the plastic fitting that would allow the product to last longer. PROBLEM RESOLVED I was contacted by the manufacturer LamicallDirect who refunded the cost of the original product and replaced it at no cost with a new flexible arm tablet mount. The flexible arm on the new product does not have the plastic fitting that failed in the previous model. It appears to be stronger and should not have the problem with failure. The clamp that mounts the stand and the clamp that holds the tablet have some slight improvements that improve the overall performance of the product. The tablet mount has a wider channel that allows more room for a tablet with a cover which is a nice improvement. I appreciate the concern of the company that appears concerned about customer satisfaction and delivering a quality product. I have revised my overall rating accordingly.

This is the third gooseneck tablet holder that I have purchased. The same brand each time. They are great as long as they hold up but in my experience there is one major flaw. The joint between the stiff part of the mast and the more flexible portion does not seem to hold up well. In my experience they last about a year before that Junction fails. Even when I try to avoid twisting at that point, it still seems to give out. It would be nice if they could improve that junction point. Still, it is very handy and worthwhile

The tablet stand served the function up, not only holding my small iPhone 13 mini, but also holding my iPad. I really appreciated that it could hold both. I found that the clamp was wide enough to fit many surfaces so that I could use it while sitting at the table or I could use it in the bed or I could use it in a chair. That flexibility was much appreciated. I found the metal rod to be stiff enough so that the vibration in the movement was not too much. It allowed me to put it in different positions successfully. I use this about once a week for the last six months and am fairly gentle with my equipment. Unfortunately, the metal flexible rod that connects to the phone and tablet attachment has broken. This seems to be a fatigue failure to me. Shifting the position of the phone back-and-forth has worn out the metal and caused it to break. I am confident that my shifting the physician on the phone was not very frequent. So this is a problem. The unit is no longer something that I can use. I have taken a look to see if there is any anyway in which I can repair this. I have not been able to come up with a successful solution. I have now reached out to the company in hope that a satisfactory answer and solution can be found. I do not wish to throw away something after only six months.

I bought this tablet holder late last year in anticipation of spinal fusion surgery, but didn't take it out of the box until a few months ago. A huge regret. This is one of those gadgets you don't know you can't live without until you start using it! Set-up is easy, lthough, it can be a bit tricky. I attach mine to my bed frame. You have to hold the base in place with one hand while you screw the round piece into place with the other, trying to keep the arm from falling over in the process. You get used to it. Given the fact that the base is round it is not surprising that stability could be better. If I tighten the round piece as far as it will go the arm will stay in place without damaging the surface of my bed frame. But as soon as I start manipulating the positioning of my cell phone, the round piece loosens and the arm falls to either side. The product is so useful, however, that this is a fairly minor inconvenience. I will say that the arm itself is extremely stiff. I'm sure this is necessary for holding heavier tablets. However, I have joint issues. Especially in my hands. It causes pain and weakness, so I did have trouble manipulating the arm. I would definitely give this product 5 stars for usefulness! 1) I spend a lot of time in bed due to chronic health issues. I swear my cell phone calls to me. Maybe it's the ADHD, but I can't seem to watch tv without ending up "multi-tasking" on my phone. My pinky fingers will go numb from having the phone rest on them at an unnatural angle for long periods of time. This resolved once I started keeping my phone in the holder while in bed. As the product info explains, the holder is meant to be used for watching videos, etc. So typing will cause the arm to bob. I just lightly hold it in place with one hand. Not a big deal for occasional typing and much easier on my joints! 2) MY EYES!!!! I set my holder up purposely so that my phone is at a healthy distance for my vision. Gadget screen use is a major cause of eye strain. I noticed a decrease in headaches and blurry vision from eye fatigue after using the holder vs holding my phone in my hand! 3) There are times I have to copy info from my cell phone to my laptop. Before the holder I would have to prop my phone up on my bed and then have to keep moving my head from side to side trying to type the info before I forgot it. This can be a strain on the neck for those with cervical instability. The holder allows me to suspend my phone flush up against my laptop screen, which is incredibly convenient. I seriously can't believe I took so long to purchase one of these things! Sturdiness is where this product loses major points. It is sturdy...until it is not. As you can see in the pictures, there is a weak point where the tablet holder meets the arm. One day I went to adust the arm position and my phone went limp. I was able to roll the plastic covering back to expose the metal underneath. It almost looks like someone took some wire cutters to it. If you read through other reviews you will see that this is a fairly common issue with this product. If you click on the link for the seller there is warranty info. You have 18 months to get a replacement or refund for quality issues. I emailed Lamicall today, so hopefully I will have a replacement fairly soon. My pinkies are already going numb again. I miss my holder!!!!

I received this product and few weeks went by and so it broken off, which was disappointing at first. However, I reached out to the seller and was blown away by how quickly and professionally they responded. They gave me the option of a partial refund or a replacement with an upgraded version, and I didn’t even have to send the broken one back. I chose the improved replacement, and it’s honestly a huge upgrade. It works perfectly and has really exceeded my expectations. Great product and even better customer service. Highly recommend the improved one.

This holder makes it really easy to use a tablet hands-free. It’s sturdy, adjustable, and holds the device in place without slipping. Great for watching shows, reading, or just not having to hold your screen the whole time.

Giving this product 4 stars but for a specific reason. It worked great at first. However, I went to adjust it last week (after only a few uses) and it just fell apart. Pieces went flying. I reached out to Lamicall and they VERY QUICKLY emailed me and offered to ship the newer version for free to my home. I just received it and it seems much sturdier. Fingers crossed!