Chengying 50 inch 10 Point Multi-Touch Infrared Touch Frame, ir Touch Panel, Infrared Touch Screen Overlay

I bought this earlier this year and it was very easy to install. It works perfectly as advertised and has never messed up. Works perfectly. Very responsive. I was actually surprised it came together as planned and worked as I had hoped. I’m very surprised actually. The sticky has never even messed up that adheres the panels onto the frame. Very tight and not loose as I had a feared over time. They have maintained their sticky. But to be sure… just make sure you wipe down your tv or monitor frame real good that you use it on. I have a 50 inch Toshiba tv. I can use it for about anything(software) I want and have tried to pull up on the screen. As you can see I have TradingView up now for my cryptos and it works just fine. You can see I have 8 charts up and my watchlist to the right. The scrolling and the touching… precision perfect! I definitely have confidence in this and will buy again for other uses with other computers. I don’t think you can have multiple screens per computer though. I have Windows Professional 10 on this computer. Very happy with the purchase and it was worth it.

Easy to install and calibrate. Seems solid and works well. So far so good.

Super cool and works well, easy to put together and get to work in just a few minutes. Pretty accurate touch and no need to calibrate. Only minus one star because the 2 sided sticky tape provided failed in 2 weeks, it fell off yesterday and again today, so gonna have to find a better tape before i put it up again, hopefully still works (it did after the first time)

This IR frame works perfectly with the TCL RokuTV I purchased to use as a play surface for the board and card game table I am building. With the IR frame played on top (and supported with a simple Raspberry Pi, no extra software needed aside from the OS), this setup worked right out of the box. The position detection is very accurate and can support up to ten touch points at a time. The outer dimensions of the frame were maybe a quarter inch bigger than my TV, but that worked out in my favor, as it minimizes the amount of the screen covered by the edge of the frame. Would totally recommend this for a game table, or a classroom touchscreen application. For the money, you can't beat it.

I bought a 75" touch frame...$350.00+ down the tubes! It does NOT work! I've run the calibration utility program which reports errors and has a diagnostic function...and saved the files and did screen shots and sent it all to their support email. They replied that they had no idea what the error code and diagnostics meant! They suggested that I remove it from the TV and put it on the floor and test it there. I did and checked all the joints and connections. No change. No workie! It's out of return and warranty so no help there! I really have a problem with a company that makes a product, it does not work, and they cannot figure out what the error code is! This is really poor customer service. So it has to go into the trash. And I will try another company, a competitor, with a smaller touch screen frame since I cannot afford a big one right now. I do not recommend this product from this company.

First of all, the packing for shipment was extremely solid so the frame arrived in perfect condition. Assembly was quick and easy. All parts were very clearly labeled and the included instructions, were spot on. This was a 65" frame so installation needed two people to ensure that the frame was lined up with the screen. It mounts with double stick tape and this was the questionable part of the install. But plenty of tape was included and it is very sticky. So make sure that you have it lined up exactly the way that you want it because once it is on, it is not easy to remove. The frame itself is very light weight so the double stick tape holds it just fine. Note: there is NO GLASS in this frame. It is is infrared so you don't even have to actually touch the screen that the frame is mounted on. You merely need to break the infrared sensor for the frame to register a "touch". We turned a 65 inch LED television into a 65 inch touch screen monitor connected to a PC. The manufacturer has calibration software available on their website for easy download but it wasn't needed. The frame came perfectly calibrated. One last thing to note. The frame is about a half inch wide, so if the screen/TV you are mounting to is "Display to the edge", the frame will block part of the screen. So if you are running it as a touch screen monitor connected to a computer like we are, you may need to mount the frame lower so that the frame is not covering the bottom task bar of the operating system. If you are having doubts over whether this product will work, don't. It works!

This is a really slick product, I like it overall. Assembly is straightforward if a bit manual; though I enjoy applying my own double-stick tape, others might prefer that it be pre-cut and pre-stuck. It turned an old(er) 27" iMac into a big touchscreen, which is fantastic. The iMac is too old to run the latest macOS, but it runs Windows 10 just fine, and the touch driver loaded automatically, I didn't have to do anything but plug it in and boot the machine. The only physical downside in this specific case is that the frame blocks most of the built-in iSight camera. I may try making a small divot across the top edge of the frame with a Dremel, but that's a bit dicey with the frame already installed.There are other downsides, though, that cause me to take away stars. With this frame installed and connected, the computer will not go to sleep, won’t turn off the monitor. Ever. Removing a star for this. Also, if you run multiple monitors in extended-desktop mode rather than mirrored (e.g., you want to use your computer for touch-screen-driven PowerPoint presos), there’s no way to tell this frame which monitor to control — and in my case, it inexplicably picked the non-primary monitor. Removing another star for this.UPDATE: It is possible to fix the wrong-monitor issue, so I’m replacing the star: https://superuser.com/questions/836416/windows-touch-screen-with-multiple-monitors-puts-cursor-on-wrong-monitor

Set up from unpacking to using it on my screen took probably less than 30 minutes. Worked out of the box on Ubuntu 24.04. Wonderful product so far.

Perfect and well packaged

27インチモニターがタッチパネルなり面白いですね。ノートパソコンのような操作まではいかなくてもそれなりの動きをしてくれます。マウスのポインターが何処へ行ったのか一瞬分からなくなってもペンでタッチできるので助かります。

tal y como se describe

I was nervous about ordering this product but after doing so I am very happy with the product. After placing the order I was contacted to confirm that the sizing was correct and that I was happy with the actual item in the order, in case it wasn't what I expected, I thought this was excellent, saving them and me any hassle returning goods over such a distance if not what I thought it was meant to be, it then arrived well packaged ahead of schedule. Works as expected.

It's not often I leave a 5 star review for a product because there's nearly always room for improvement, but not this. This frame works perfectly and is incredibly easy to set upThe frame sections are marked to show which piece attached to which, and it also comes with a little screwdriver and double sided table already attached to the frame. On my windows 11 laptop, it was simply a case of switching it on and plugging the USB cable in and it worked straight away.I built an interactive smart table and uses a 5mm thick sheet of acrylic to cover the TV I used as the monitor and the touch accuracy was spot on. The instal manual came with a website link to a calibration tool which I did use, but the frame didn't really need it.Single taps, double tabs, swiping, pinch to zoom and mult touch points all work flawlessly. I never heard of this company or ever used an overlay frame like this so I was dubious about paying so much, but it really was well worth it. Highly recommend.