Teflon Tape for Vacuum Sealer Machine,Hand or Impulse Sealer(19mm x 10m),PTFE Tape,Fits FoodSaver, Seal A Meal, Weston, Cabella's by Impresa

Description

With normal usage the tape protecting the heating element in most vacuum sealers doesn't need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing. How Do I Install My Replacement Tape? To install: 1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off). 2) Cut your new OutOfAir replacement tape to the correct size. 3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond. And that's it! Will OutOfAir replacement tape work with my machine? Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags. For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape). For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape). Good for DIY, it will be your super assistant and very helpful! Multipurpose:Impulse Sealer, high-speed sealing machine, food packaging, hot melt machine, motor, high and low voltage electrical products, wire and cable insulation protection, battery manufacturing sewing machine and so. It is high temperature resistance, ,wear-resistant, corrosion-resistant, anti-sticking. The maintenance worker used it to isolate the components near the thermal chip when doing BGA, and it works great! Specification: Thickness：0.13mm Wide： 19mm Length：10m Tape resistant temperature：-148℉~518℉（-100℃~270℃） Contents: 1 x Teflon tape